There are times when you experience a slow internet connection over a wireless network. And there can be quite a lot of reasons behind it. However, by figuring out the Wi-Fi signal strength on Windows 10, you can diagnose the issue and fix it. Also, by looking at the Wi-Fi signal strength in Windows, you can measure the performance of your internet. So the question is, how to check your WiFi signal strength on Windows 10?
There are a bunch of ways to know the Wi-Fi signal strength on a Windows 10 system. For instance, you can use the taskbar or go to the control panel. However, to help you understand better and let me go ahead and explain to you how to check your Wi-Fi signal strength on Windows 10.
How is WiFi Signal Strength measured in Windows 10?
Wi-Fi signal strength is mainly measured in decibel milliwatts or dBm. The power ratio in decibels of the measured power is referenced to one milliwatt.
Usually, a strength between -55 dBm and -75 dBm is considered acceptable depending on how close or far away your wireless router is.
Suppose you are in the same room as your wireless router and still have difficulties achieving a good network performance. You have to understand that the wireless network gets affected by various environmental noises from various electronic devices and other wireless networks.
How to Check Your WiFi Signal Strength in Windows 10
Use these methods to check the Wifi strength of your computer. This works on both the computer and the laptop.
- Taskbar or Settings or Control Panel
- Command Prompt
- WiFi Analyzer
Any user can use these methods to check Wifi strength.
1] Taskbar or Settings or Control Panel
The taskbar is the easiest way to check your Wi-Fi signal on Windows 10. All you have to do is click on the Wi-Fi icon in the Taskbar, and it will show you the signal strength of the wireless connection.
The other way is to use the Windows 10 Settings. Go to Settings Network & Internet > Wi-Fi, and over here, you will get to see the signal strength.
Alternatively, you can also make use of the Control Panel, which will give you some additional information related to your wireless network. Like the signal quality, speed and give you access to different options. To know the strength of your wireless network via the control panel, do follow these steps:
- Go to the Control panel.
- Then click on View network and status and tasks.
- Next, click on the network name from the Connection listings to view the Wi-Fi status menu.
- Finally, look for Signal Quality, and it will tell you about the Wi-Fi Signal Strength Windows 10.
2] Using Command Prompt
If you wish to know the accurate wireless signal strength, then using the command prompt or CMD would be a good idea. For this, you will need to follow these steps:
- Open the Start menu and search for CMD.
- Then right-click on it and select Run as administrator.
- When you are on CMD, type down this following command and hit enter:
netsh wlan show interfaces
Once the command gets executed, you will see every detail associated with your Wi-Fi connection, including network strength.
Look at the section which says Signal. Next to it is data which is in percentage. This is the signal strength of the Wi-Fi.
3] WiFi Analyzer
Apart from using Windows 10 in-built tools, you can also rely on third-party applications to check your wireless network strength. One such asp is the WiFi Analyzer, and it can be downloaded absolutely free from the Microsoft Store. Plus, there is also a pro version with additional features.
You can use this tool for identifying Wi-Fi Problems, find the best channel or the best place to keep your Wi-Fi router. Furthermore, you can also see all the networks around you, which can interfere with your connection. You can find detailed information related to the router or access point. Plus, you can check your Wi-Fi’s link speed and health.
Plus, you are getting a bunch of advanced features with the pro version. Like you can refine found network results by filters, connect to a new network easily without leaving the app, it lets you use a beeper to hear the signal strength, and so on.
NetSpot is another Wi-Fi signal strength checking tool available for Windows 10. This one is a wireless site survey software for Mac and Windows. With just a few clicks, you will be able to start measuring your wireless signal.
The best part of this tool is that it creates a visual Wi-Fi map. So you can get to see all the dead zones with poor Wi-Fi coverage. As a result, you will be able to place your router accordingly or adjust the channel’s loads to get the perfect Wi-Fi coverage all across your Home or Office.
While the app is free to download, the free version has only basic features. But you can always go for the premium plans according to your needs.
Lastly, you can check out the inSSIDer. It is also one of the best tools for checking WiFi signal strength on Windows 10. It analyzes the configuration of your WiFi, including channel settings, security, signal strength, and the impact of neighboring WiFi networks.
And then, it offers you an effective report on how you can make changes to improve your WiFi signal’s strength. So you can get rid of slow WiFi connection or poor WiFi coverage forever.
What’s more? The tool is absolutely free to download. However, you would need to create an account before you actually start using it.
So those were a few methods that will help you determine the WiFi signal strength on Windows 10. Now go ahead and give these methods a try and see if they are working for you or not. Also, I hope this guide has helped you with your question about how to check your WiFi signal strength on Windows 10.